Select part below to open more information about each part below.

• 1. Faceplate

  Purpose is to both conceal the lock tube and the infill screws. The faceplate is .062 thick aluminum.

• 2. Lock tube

  1 x 1 1/4 galvannealed tube which adds strength to the mainframe and houses the locking mechanism.

• 3. Infill

  Choice of 12, 16 or 18 gauge perforated steel or .028 x 12 x 12 304 stainless mesh. These are the most common infill but other are available. Infill attached to mainframe using stainless steel fasteners every 5 inches. Normally powder coated black.

• 4. Lock Assembly

  The guard opens or closes using a single point locking mechanism. The guard is secured in a closed position with 3/8 inch diameter steel bolts. These bolts are connected using a stainless steel lock bar. Guards will have a minimum of 2 bolts and will use 3 when a guard height exceeds 5 feet.

• 5. Subframe

  .090 aluminum extrusion which houses the mainframe. The subframe provides a sturdy means of locking the guard as well as providing a means for installing the guard.

• 6. Lock guard and handle

  The steel lock guard conceals and protects the locking handle. Panic hardware is available as an option.

• 7. Finish

  Powder coated. See color chart to the right and download to view larger.